Wiring Diagram Ideas

How To Wire An Evinrude Ignition Switch

Evinrude Ignition Switch Wiring Diagram exatin.info
Evinrude Ignition Switch Wiring Diagram exatin.info from exatin.info

Wiring an Evinrude ignition switch is an easy process, as long as you have the right tools and know-how. The switch controls the start, run and stop functions of your engine, and allows you to start it from a distance. This can be very useful if you need to start the engine while you are at the helm. It can also save you time and energy, as you don’t need to walk to the engine compartment every time you want to start it.

In this article, we’ll be discussing the steps to wiring an Evinrude ignition switch. We’ll go over the components required, the tools you’ll need, and the overall process. We’ll also include some helpful tips to ensure a successful installation. Let’s get started!

Components Needed

Before you start wiring an Evinrude ignition switch, you’ll need to gather all the necessary components. The components you’ll need vary depending on the model of your engine, but usually include:

• Ignition switch
• Ignition switch wiring harness
• Key switch
• Wire nuts
• Marine grade electrical wire
• Heat shrink tubing
• Electric tape
• Crimp connectors
• Wire strippers

Tools Needed

In addition to the components listed above, you’ll also need some tools to complete the wiring. The tools you’ll need include:

• Screwdrivers
• Wrenches
• Wire cutters
• Pliers
• Electrical tape
• Crimping tool

Step by Step Guide to Wiring an Evinrude Ignition Switch

Now that you have all the components and tools needed, let’s begin the process of wiring the Evinrude ignition switch. Follow these steps to complete the process:

Step 1: Disconnect the battery from your boat. This will prevent any accidental electric shocks while you work.

Step 2: Attach the ignition switch to the dashboard of your boat. Make sure it is securely mounted and cannot be easily removed.

Step 3: Connect the wiring harness to the ignition switch. This will provide power to the switch.

Step 4: Connect the key switch to the ignition switch. This will provide a way to start and stop the engine from a distance.

Step 5: Connect the positive and negative leads from the battery to the ignition switch. This will provide power to the switch and enable it to start and stop the engine.

Step 6: Connect the wires from the ignition switch to the engine. This will provide power to the engine and allow it to start and stop.

Step 7: Secure all the wires with wire nuts and electrical tape. This will ensure the wires are secure and won’t come loose.

Step 8: Test the ignition switch. This will ensure that the switch is working properly and can start and stop the engine.

Additional Tips

When wiring an Evinrude ignition switch, there are some additional tips to remember:

• Make sure to use marine grade electrical wire, as this is designed to withstand the harsh marine environment.

• Use heat shrink tubing to protect the connections from water and corrosion.

• Make sure to use the correct size and type of crimp connectors.

• Make sure all the wires are securely fastened and won’t come loose.

• Test the switch before you put the boat back in the water.

Conclusion

Wiring an Evinrude ignition switch is a relatively simple task, as long as you have the right components and tools. With the steps outlined above, you should be able to easily wire the switch and have your engine running in no time. Just remember to use marine grade electrical wire and to test the switch before putting the boat back in the water. Good luck and happy boating!